M-SERIES

M050-i

Magnetron Modulator. Designed to handle magnetrons in the 0.2 MW to 2 MW range. It also simplifies the system design for cooling since it only requires air cooling.

RF peak power: 0.2 – 2 MW
Pulse voltage: 20 – 40 kV
Pulse current: 20 – 100 A
Modulator peak: 4 MW
Modulator avg.: 1 kW

Datasheet M050-i
Drawing
3D Model (step)
ScandiNova M-series

M050-i Size and Weight.

Weight approx. 49–59 kg

Pulse control leads to new possibilities.

All new ScandiNova pulse modulators and pulse generators are equipped with a user-friendly and modern control system for calibration, diagnostics and adjustments. The system offers a wide range of different shape modifications. Amplitude, pulse width and frequency can easily be changed and visualized on the user friendly GUI. The system also provides an overview of status for key functionality/components, Trig, Interlocks and Real-time event log. With EtherCAT remote control (option) it is also possible to set different voltage levels for each individual pulse.

The control system for the Magnetron modulators (M-series) is operated by a PC interface.

The Magnetron Pulse Modulator – M50-i is our smallest platform and offers a very small package for customers with a need to drive low power magnetrons in a volume restricted package. This low power magnetron modulator is designed to handle magnetrons in the 0.2 MW to 2 MW range. It also simplifies the system design for cooling since it only requires air cooling. This modulator provides unparalleled performance, ease of integration and use by customers and provides the smallest package size available to meet system integrators most critical packaging needs.

The ScandiNova M50-i modulator is an outstanding choice to meet your most critical needs.

Key features.

  • Reliable modular design results in a modulator that provides an extremely high level of operator and technician safety due to low primary voltage levels. These low voltages also eliminates most component failures due to reduced thermal and electrical stress.
  • Lower cost of ownership due to high electrical efficiency, removal of expensive consumables that need regular maintenance and fewer unscheduled stops. The high electrical efficiency allows cooling costs to be approximately half of a line type pulse forming network modulator.
  • Precise control over the pulse shape and amplitude allows users to configure the modulator to get optimal performance from their transmitter system. Both peak and average power delivery can be adjusted over time to meet changing system requirements.
  • A wide array of digital data interfaces are supported allowing system parameters to be modified and operating data to be communicated to the customer. This allows for easy system setup, performance monitoring and data archival.

Typical Magnetron Loads

BVERI

VE2042B
VE2093

CPI

SFD303B
SFD313
VMC1081
VMS1610
VMX3045
VMX3095
5586
5657

E2V

MG5125

L3

PMX1100
L-0123S
L-0124S
L-0500C
L-0777C
L-0778C
L-6170

NJRC

MX7637
MX7638
MX7639

Need help finding a product?

Get contacted by ScandiNova

Required